PRO-36 PM Battery Cordless Drill With Permanent Mag Base

This special design battery-operated drilling machine equipped with a permanent magnetic base is dedicated to operate in remote areas, where no power supply is available.
The base includes very strong neodymium magnets and does not require any electricity to operate.
PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information.
The drill can be used with convex (min diameter – 80 mm) and concave (min diameter 1000 mm) materials.

  • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece
  • Powered by an 18-volt DC battery – the same CAS battery as used in other cordless PROMOTECH machines
  • Dual bars guide system ensures extraordinary stiffness and adjustment-free operation
  • Overload protection
  • The tilt sensor stops the motor if the machine breaks away
  • The control panel is equipped with so-called „vandal-resistant” illuminated start/stop motor buttons.
  • 2 year warranty
Download PDF Download Send Enquiry Email
battery
pro 36 pm battery
warranty-drills
core-drill

Core drill

max. 36 mm

twist-drill-weldon-shank

Twist drill / with Weldon Shank

12 mm / 19 mm

depth-of-cut

Depth of cut

max. 50 mm

stroke

Stroke

70 mm

motor-speed

Motor speed

260 rpm

New permanent magnetic base is dedicated to operate with convex (min diameter – 80 mm) materials

New permanent magnetic base is dedicated to operate with concave (min diameter 1000 mm) materials

When the power is switched on and motor is switched off, the drill enters sleep mode after 60 seconds of inactivity to save the battery.

LED Monitoring System

Ergonomic handle for easy transportation

New control system of battery pack
Motor speed (under load) 260 rpm
Power 400 W
Weight 14.5 kg (with 4.0 Ah battery)
Max milling capacity 36 mm (1.42”) with TCT cutters 30 mm (1.18”) with HSS cutters
Max drilling capacity 12 mm (0.47”)
Stroke 70 mm (2.76’’)
Max depth of cut 50 mm (1.97’’)
Voltage 18 V DC
Magnetic base holding force 714 kgf (7 000 N)
Magnetic base dimensions 75 mm × 188 mm × 53 mm
Minimum workpiece thickness 6 mm (0.24”)
Tool holder 19 mm (3/4") Weldon
Product Code WRT-0765-10-00-00-0

Product Enquiry

Need more details on our industrial solutions? Let’s talk! Fill out the form below and our team will promptly assist you. We’re here to help you find the right product for your specific needs.