Home Welding and Cutting Tractors DRAGON Battery | Cordless Cutting Tractor

DRAGON Battery Cordless Cutting Tractor

The DRAGON BATTERY is a cordless thermal cutting tractor featuring a precise, stable travel speed that produces accurate cuts and bevels. The machine can be used on any standard 6˝ V-grooved track.
The DRAGON BATTERY is powered by a LiHD (High Density Lithium-ion) battery that provides enough power to handle the most challenging applications without power cables. Intelligent battery management ensures long life and safe operation. A wide assortment of optional accessories like machine barrel torch holders, manifolds, circle-cutting attachments and
plasma kit makes it useful for a variety of applications.

Ideal for use in the field – no need for mains power and one less cable to carry around
Conveniently powered by an 18-volt DC battery (same CAS battery as other cordless PROMOTECH machines)
The LiHD battery, supported by intelligent battery management, ensures maximum power availability for an extended period
Digital speed control and stabilization for high-quality cuts
Cutting and bevelling up to 45° (also parallel, using 2 torches)
LED display with readouts of both actual and set speeds, as well as report messages
Runs on a rail or directly on a workpiece
3 years of warranty

Watch video Download PDF Send Enquiry

To get the most of this product, explore our new >>

Welding & cutting accessories

Straight cutting

Diagonal cutting

Strips cutting

K-bevel cutting

Double diagonal cutting

Circle cutting

Top angled cutting

Straight cutting

Bottom angled cutting


Voltage	18 V DC, 4 Ah
Power	20 W
Work position	horizontal
Torch diameter	28–35 mm (1.10–1.38’’)
Ground clearance	8 mm (0.31’’)
Speed	0–150 cm/min (0–59 in/min)
Weight (without battery) 15.2 kg (33.5 lbs)	15.2 kg (33.5 lbs)
Protection class	IP 20
Allowed ambient temperature during operation	0–50°C (32–122°F)
Allowed ambient temperature during storage	-10–60°C (14–140°F)
Maximum allowed ambient humidity without condensation	80%
Product Code	WOZ-0788-10-00-00-0

Search by name

Search by product code

Filter by category

Select all
Batteries and chargers
Covers and shields
Cutting miscellaneous
Manifolds
Cutting torch holders and matching accessories
Tracks & matching accessories
Vacuum track system

Results: 65

No results found. Try changing your filters or search term.

Batteries and chargers

AKM-0738-10-00-01-0 Battery LiHD 18 V 4.0 Ah
- LiHD battery packs
- battery pack voltage: 18 V
- Intelligent battery management for long-lasting battery packs
- too low and too high voltage
- too low and too high temperature
- failure of the temperature sensor
- internal battery failure
- battery pack capacity: 4.0 Ah
- energy: 72 Wh
- weight: 580 g
AKM-0738-10-00-02-0 Battery LiHD 18 V 10.0 Ah
- LiHD battery packs
- battery pack voltage: 18 V
- Intelligent battery management for long-lasting battery packs
- too low and too high voltage
- too low and too high temperature
- failure of the temperature sensor
- internal battery failure
- battery pack capacity: 10.0 Ah
- energy: 180 Wh
- weight: 1010 g
- (requires mounting of optional shield OSL-0788-08-00-00-0)
AKM-0738-10-00-03-0 Battery LiHD 18 V 5.5 Ah
- LiHD battery packs
- battery pack voltage: 18 V
- Intelligent battery management for long-lasting battery packs
- too low and too high voltage
- too low and too high temperature
- failure of the temperature sensor
- internal battery failure
- battery pack capacity: 5.5 Ah
- energy: 99 Wh
- weight: 980 g
- (requires mounting of optional shield OSL-0788-08-00-00-0)
LDW-0738-04-00-30-0 Quick Charger ASC 145, "AIR COOLED"
- UK plug
- battery pack voltage: 12-36 V
- output rating: 145 W
- max. charging current: 8 A
- weight: 551 g
- the battery packs are charged up to 4x faster than with an entry level charger
- patented “AIR COOLED” charging technology for short charging times thanks to cooling the battery pack
- charging time:
- ~ 30 min (4.0 Ah)
- ~ 41 min (5.5 Ah)
- ~ 74 min (10.0 Ah)
LDW-0738-10-00-30-0 Quick Charger ASC 145, "AIR COOLED"
- EU plug
- battery pack voltage: 12-36 V
- output rating: 145 W
- max. charging current: 8 A
- weight: 551 g
- the battery packs are charged up to 4x faster than with an entry level charger
- patented “AIR COOLED” charging technology for short charging times thanks to cooling the battery pack
- charging time:
- ~ 30 min (4.0 Ah)
- ~ 41 min (5.5 Ah)
- ~ 74 min (10.0 Ah)
OSL-0788-08-00-00-0 Enlarged battery shield
- enables using LiHD CAS batteries: 5.5 Ah and 10.0 Ah

Covers and shields

OSL-0475-54-00-00-0 Heat protection shield (left)
OSL-0475-55-00-00-0 Heat protection shield (right)
OSL-0753-20-00-00-0 Heat protection shield (bottom)

Cutting miscellaneous

PDT-0475-34-00-00-0 Cable anchor for DRAGON family
- rod length: 256 mm
- rod diameter: 22.2 mm
PDT-0475-26-00-00-0 Roller supporter
- 280 mm long rod with roller ball
- hole 22.2 mm ID for rod with roller ball
- hole 25 mm ID for rod with geared rack
- 2 locking levers
CYR-0475-22-00-00-0 Circle cutting attachment
- allows for cutting holes with the radius of 240-1000 mm (9 29/64″-39 3/8″)
CYR-0475-83-00-00-0 Circle cutting attachment (extended)
- allows for cutting holes with the radius of 400-2500 mm (15 3/4″-98 27/64″)
PWG-0753-09-00-00-0 Counterweight 1.3 kg (2.9 lbs)
- 1.3 kg (2.9 lbs)
PWG-0753-12-00-00-0 Large counterweight 2,6 kg (5,7lbs)
- 2,6 kg (5,7 lbs)

Manifolds

RZD-0475-63-00-00-0 Manifold 2x3 (metric)
- inlet 1/4″ RH
- inlet 3/8″ LH
- outlet 1/4″ RH (2 pcs)
- outlet 3/8″ LH
RZD-0475-64-00-00-0 Manifold 2x2 (metric)
- inlet 1/4″ RH
- inlet 3/8″ LH
- outlet 1/4″ RH
- outlet 3/8″ LH
RZD-0475-65-00-00-0 Manifold 2x2 with cut-off valve (metric)
- inlet 1/4″ RH
- inlet 3/8″ LH
- outlet 1/4″ RH
- outlet 3/8″ LH
- cut-off valve
RZD-0475-66-00-00-0 Manifold 2x3 with cut-off valve (metric)
- inlet 1/4″ RH
- inlet 3/8″ LH
- outlet 1/4″ RH (2 pcs)
- outlet 3/8″ LH
- cut-off valve
RZD-0475-67-00-00-0 Manifold 2x3 (imperial)
- inlet 9/16″ RH
- inlet 9/16″ LH
- outlet 9/16″ RH (2 pcs)
- outlet 9/16″ LH
RZD-0475-68-00-00-0 Manifold 2x2 (imperial)
- inlet 9/16″ RH
- inlet 9/16″ LH
- outlet 9/16″ RH
- outlet 9/16″ LH
RZD-0475-69-00-00-0 Manifold 2x3 with cut-off valve (imperial)
- inlet 9/16″ RH
- inlet 9/16″ LH
- outlet 9/16″ RH (2 pcs)
- outlet 9/16″ LH
- cut-off valve
RZD-0475-70-00-00-0 Manifold 2x2 with cut-off valve (imperial)
- inlet 9/16″ RH
- inlet 9/16″ LH
- outlet 9/16″ RH
- outlet 9/16″ LH
- cut-off valve
RZD-0475-71-00-00-0 Manifold 3/3 with cut-off valve (imperial)
- inlet 9/16″ RH (2 pcs)
- inlet 9/16″ LH
- outlet 9/16″ RH (2 pcs)
- outlet 9/16″ LH
- cut-off valve
RZD-0475-72-00-00-0 Manifold 3/3 with cut-off valve (metric)
- inlet 1/4″ RH (2 pcs)
- inlet 3/8″ LH
- outlet 1/4″ RH (2 pcs)
- outlet 3/8″ LH
- cut-off valve
RZD-0475-73-00-00-0 Manifold 3/3 (imperial)
- inlet 9/16″ RH (2 pcs)
- inlet 9/16″ LH
- outlet 9/16″ RH (2 pcs)
- outlet 9/16″ LH
RZD-0475-74-00-00-0 Manifold 3/3 (metric)
- inlet 1/4″ RH (2 pcs)
- inlet 3/8″ LH
- outlet 1/4″ RH (2 pcs)
- outlet 3/8″ LH
PDT-0475-87-00-00-0 Gas manifold bracket for DRAGON family

Cutting torch holders and matching accessories

ZCS-0475-28-10-00-0 Standard torch holder incl. clamp 28-35 mm
- clamp for cutting torches ranged 28-35 mm OD
- dowel pin 22.2 mm OD
UCW-0475-28-00-00-0 Standard torch holder incl. clamp 28-35 mm and angle adjustment
- clamp for cutting torches ranged 28-35 mm OD
- dowel pin 22.2 mm OD
- double clamping block with two holes 22.2 mm ID and levers
UCW-0753-08-00-00-0 Precise torch holder incl. clamp 28-35 mm with angle and height adjustment
- clamp for cutting torches ranged 28-35 mm OD
- dowel pin 22.2 mm OD
- tilt the torch 45 degrees to the left and right
- up-down adjustment within a range of up to 81 mm
- double clamping block with tapered tip with two holes 22.2 mm ID and levers
UCW-0475-61-00-00-0 Machine torch holder 30 mm (1-3/16")
- suitable for 30 mm (1-3/16″) diameter barrel machine torch with 32 pitch rack
- 32 pitch gear shaft
- double clamping block with two holes 22.2 mm ID and levers
UCW-0475-29-00-00-1 Machine torch holder 35 mm (1-3/8")
- suitable for 35 mm (1-3/8″) diameter barrel machine torch with 32 pitch rack
- 32 pitch gear shaft
- double clamping block with two holes 22.2 mm ID and levers
UCW-0753-22-00-00-0 Precise machine torch holder 30 mm (1-3/16") with angle adjustment
- suitable for 30 mm (1-3/16″) diameter barrel machine torch with 32 pitch rack
- 32 pitch gear shaft
- tilt the torch 45 degrees to the left and right
- double clamping block with tapered tip with two holes 22.2 mm ID and levers
UCW-0753-24-00-00-0 Precise machine torch holder 35 mm (1-3/8") with angle adjustment
- suitable for 35 mm (1-3/8″) diameter barrel machine torch with 32 pitch rack
- 32 pitch gear shaft
- tilt the torch 45 degrees to the left and right
- double clamping block with tapered tip with two holes 22.2 mm ID and levers
RAM-0475-07-01-00-0 300 mm long rod with 241 mm geared rack
- 300 mm total length
- 22.2 mm OD at the rod ends
- 25 mm OD on a 241 mm long geared rack
- tapped hole M6 - 12 deep || 14 total, at both ends
RAM-0753-07-00-00-0 540 mm long rod with 449 mm geared rack
- 540 mm total length
- 22.2 mm OD at the rod ends
- 25 mm OD on a 449 mm long geared rack
- tapped hole M6 - 12 deep || 14 total, at both ends
RAM-0475-07-03-00-0 700 mm long rod with 647 mm geared rack
- 700 mm total length
- 22.2 mm OD at the rod ends
- 25 mm OD on a 647 mm long geared rack
- tapped hole M6 - 12 deep || 14 total, at both ends
RAM-0753-13-00-00-0 1000 mm long rod with 940 mm geared rack
- 1000 mm total length
- 22.2 mm OD at the rod ends
- 25 mm OD on a 940 mm long geared rack
- tapped hole M6 - 12 deep || 14 total, at both ends
UCW-0475-15-00-00-1 Sliding clamping block type 2
- hole 25 mm ID for moving rods with geared rack
- (in Y axis) left and right
- star knob with sprocket m=1 t=16
- hole 22.2 mm ID for rods
- 2 locking levers
KST-0475-82-00-00-0 Clamping block (large)
- hole 22.2 mm ID for rods
- hole 25 mm ID for rods with geared rack
- 2 locking levers

Tracks & matching accessories

TRO-0475-13-00-00-0 V-track
- for straight line applications
- “V” Groove center line 152 mm (6″)
- length of a single rail 1.8 m (5.9 ft)
- joinable for unlimited run length
- can be fixed on both ferrous and non-ferrous materials by means of magnetic or vacuum units
- enables various configurations (see suitable accessories below)
ZSP-0475-92-00-00-0 Magnetic unit
- allows clamping tracks to ferromagnetic surfaces
- maximum holding force up to 2500 N
- intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
- requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
- requires bracket DYS-0482-21-00-00-0 for rigid track
- requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
MST-0677-00-00-00-0 Lightweight magnetic unit
- allows clamping tracks to ferromagnetic surfaces in horizontal position
- lower weight (1.3 kg vs 2.7 kg) and smaller dimensions comparing to regular magnetic unit
- maximum holding force up to 980 N
- intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
- requires bracket DYS-0482-21-00-00-0 for rigid track
ZSP-0475-93-00-00-0 Heat-resistant magnetic unit
- suitable for working on more heated ferromagnetic surfaces
- maximum holding force up to 2500 N
- intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
- requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
- requires bracket DYS-0482-21-00-00-0 for rigid track
- requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
PDS-0582-10-00-02-0 Narrow magnetic unit with hexagon
- allows clamping tracks to ferromagnetic surfaces and very close to their edges
- maximum holding force up to 1500 N
- intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
- requires bracket DYS-0582-10-00-00-0 for hi-flex track and semi-flexible track
- requires bracket DYS-0466-71-07-00-0 for 160 mm wide flexible track
MST-0541-10-02-00-0 Vacuum modular unit
- allows clamping tracks on both non-ferrous and ferromagnetic materials
- maximum holding force up to 1400 N
- consists of 2 vacuum pads and manifold block
- requires bracket DYS-0541-11-01-00-0 for hi-flex track and semi-flexible track
- requires bracket DYS-0466-71-04-00-0 for 160 mm wide flexible track
- depending on purpose-built configurations can function as entry, middle, extension or end vacuum unit (see Vacuum System at pages 30-31)

Vacuum track system

AGR-0541-10-20-00-0 Portable vacuum pump with safety reservoir (EU plug)
- voltage: 1~ 230 V, 50-60 Hz
- EU plug
- power: 400 W
- gauge pressure obtainable: -0.8 bar (-11.5 psig) (where 0 is for atmospheric pressure, and -1 is for perfect vacuum)
- pump capacity: 4 m³/h (141 ft³/h)
- generates vacuum and supports up to 21 vacuum units
- ambient temperature: 0-40°C (32-104°F)
- safety reservoir volume: 10 l (0.35 ft³)
- weight (with safety reservoir): 23 kg (51 lbs)
AGR-0541-10-10-00-0 Portable vacuum pump with safety reservoir (UK plug)
- voltage: 1~ 115 V, 50-60 Hz
- UK plug
- power: 400 W
- gauge pressure obtainable: -0.8 bar (-11.5 psig) (where 0 is for atmospheric pressure, and -1 is for perfect vacuum)
- pump capacity: 4 m³/h (141 ft³/h)
- generates vacuum and supports up to 21 vacuum units
- ambient temperature: 0-40°C (32-104°F)
- safety reservoir volume: 10 l (0.35 ft³)
- weight (with safety reservoir): 23 kg (51 lbs)
PWD-0541-06-00-00-0 Pump connection hose 10 m (32.8 ft)
- serial connection: 1 piece for the first rail track needed
- parallel connection: 1 piece per each rail track needed
RZD-0541-04-00-00-0 4-way manifold with connection cable 0.3 m (1ft)
- power and control for up to four separate vacuum circuits in parallel connection
- enables separate connections of up to four rail tracks equipped with vacuum units
- allows leapfrogging during operation
MST-0541-10-02-00-0 Vacuum modular unit
- allows clamping tracks on both non-ferrous and ferromagnetic materials
- maximum holding force up to 1400 N
- consists of 2 vacuum pads and manifold block
- requires bracket DYS-0541-11-01-00-0 for hi-flex track and semi-flexible track
- requires bracket DYS-0466-71-04-00-0 for 160 mm wide flexible track
- depending on purpose-built configurations can function as entry, middle, extension or end vacuum unit (see Vacuum System at pages 30-31)
Entry vacuum unit
- Purpose-built configuration including:
- - MST-0541-10-02-00-0 (Vacuum modular unit)
- - ZWR-0541-10-01-30-0 (Cut-off valve)
- - KRK-0541-99-00-00-0 (Threaded plug)
- - SRB-000365 (Safety eye bolt - option to secure the suspension)
Middle vacuum unit
- Purpose-built configuration including:
- - MST-0541-10-02-00-0 (Vacuum modular unit)
Extension vacuum unit
- Purpose-built configuration including:
- - MST-0541-10-02-00-0 (Vacuum modular unit)
- - PWD-0541-10-04-00-0 (Coupled hose)
- - SRB-000365 (Safety eye bolt - option to secure the suspension)
End vacuum unit
- Purpose-built configuration including:
- - MST-0541-10-02-00-0 (Vacuum modular unit)
- - KRK-0541-99-00-00-0 (Threaded plug)
- - SRB-000365 (Safety eye bolt - option to secure the suspension)
PWD-0541-10-07-00-0 Hose 2 m (7 ft) for connecting vacuum units within rail track
- suitable for 1 rail track
- to be cut to the required length between the vacuum units
OPS-000005 Hose clamp
- 2 pieces needed to fix hose between two vacuum units
ZWR-0541-10-01-30-0 Cut-off valve for entry vacuum unit
- serial connection: 1 piece for the first rail track needed
- parallel connection: 1 piece per each rail track needed
- seal included
KRK-0541-99-00-00-0 Threaded plug for end vacuum unit
- serial connection: 1 piece for the last rail track needed
- parallel connection: 1 piece per each rail track needed
SRB-000365 Safety eye bolt
- option to secure the suspension
- recommendation: 2 pieces per each rail track
PWD-0541-10-04-00-0 Coupled hose for extension vacuum unit
- for serial connection of rail tracks
- length: 0.21 m
LCZ-0541-05-00-00-0 Hose extension adapter
- compatible with quick coupling
SSW-0541-99-01-00-0 Vacuum pad
- spare part for modular vacuum unit
KRC-000013 Hose fitting
- spare part for modular vacuum unit
SZB-000018 Quick coupling
- spare part for pump connection hose and coupled hose

PROMOTECH dragon dragon hs feature image

Product sheet | DRAGON Battery | Cordless cutting tractor 2025.12
view download
Overview | Welding and cutting tractors 2025.11
view download
Catalog | Welding and cutting tractors 2026.09
view download
Catalog | Welding & cutting accessories 2026.09
view download

Product Enquiry

Need more details on our industrial solutions? Let’s talk! Fill out the form below and our team will promptly assist you. We’re here to help you find the right product for your specific needs.