YouTube LinkedIn Facebook Instagram
eu

Gecko Kompaktowy Wózek Spawalniczy

Gecko to przenośny spawalniczy wózek kołowy, wyposażony w system napędu na 4 koła z trakcją magnetyczną oraz pętlą sprzężenia zwrotnego, zapewniającą skuteczną stabilizację prędkości wózka we wszystkich pozycjach spawalniczych. Niezmienna, ciągła i powtarzalna prędkość jazdy umożliwia uzyskanie wymaganej geometrii ściegu spoiny, co pozwala ograniczyć kosztowne nadlewy i nierównomierność lica oraz znacznie zmniejszyć zużycie spoiwa.  Szeroka gama akcesoriów sprawia, że Gecko nadaje się do różnych pozycji i zastosowań. 

  • Kompaktowy wózek o wadze 8 kg może być przenoszony w dowolne miejsce.
  • System kontroli prędkości z pętlą sprzężenia zwrotnego stabilizuje szybkość jazdy, umożliwiając równomierny dopływ ciepła celem uzyskania wysokiej jakości jednorodnych spoin
  • Wielofunkcyjny ekran LED wyświetla prędkość jazdy, jednostki oraz komunikaty diagnostyczne
  • Automatyczny system włączania/wyłączania łuku inicjuje spawanie i jazdy wózka
  • Wygodne zasilanie 115-230 V, 50-60 Hz lub 42 V, 50-60 Hz
  • Gecko wykonuje jednorodne, wysokiej jakości spoiny oraz operacje cięcia w ułamku czasu wymaganego w procesach manualnych.
  • Redukuje straty spoiwa — eliminuje nadlewy
  • 3 lata gwarancji
Obejrzyj video Play Pobierz PDF Download Wyślij Zapytanie Email
welding-position-all
gecko

Aby w pełni wykorzystać możliwości tego wózka, zapoznaj się z naszą nową ofertą

Welding & cutting accessories catalogue.
continuous-welding

Spawanie ciągłe

dual-torch-welding

Spawanie dwupalnikowe

horizontal-speed

Prędkość w płaszczyźnie poziomej

0 - 110 cm/min

pre-post

Pre-post

vertical-speed

Prędkość w płaszczyźnie pionowej

0 - 110 cm/min

warranty-tractors

Wielofunkcyjny wyświetlacz LED

Wielopowierzchniowe prowadnice

Podwójne spawanie uchwytem (Dual torch welding)

Spawanie ciągłe

Precyzyjna regulacja palnika

Spawanie w pozycjach pionowych

Użytkownicy mogą teraz ustawić czas zajarzenia łuku do 5 sekund na początku i końcu przejazdu wózka GECKO, aby uzyskać optymalne wypełnienie spoiny na obu końcach.

GECKO GECKO HS
Voltage 1~ 115–230 V, 50–60 Hz 42 V, 50–60 Hz 1~ 115–230 V, 50–60 Hz 42 V, 50–60 Hz
Power 20 W 20 W
Welding position (according to EN ISO 6947 and AWS/ ASME) PA / 1F / 1G PB / 2F PC / 2G PD / 4F PE / 4G PG / 3F / 3G (contact dealer) PA / 1F / 1G PB / 2F PC / 2G PD / 4F PE / 4G
Torch diameter 16–22 mm (0.63–0.87’’); up to 35 mm (1.38”) option 16–22 mm (0.63–0.87’’); up to 35 mm (1.38”) option
Minimum radius of curved workpiece surface OD 1000 mm (39.4”) ID 1250 mm (49.2”) OD 1000 mm (39.4”) ID 1250 mm (49.2”)
Minimum workpiece thickness 4 mm (0.16’’ 4 mm (0.16’’)
Ground clearance 4 mm (0.16’’ 4 mm (0.16’’
Horizontal pulling force 250 N 250 N
Vertical pulling force 175 N N/A
Cross slide adjustment range 0–35 mm (0–1.38’’) up down, left-right 0–35 mm (0–1.38’’) up down, left-right
Horizontal speed 0–110 cm/min (0–43.3 in/min) 5–220 cm/min (1.5–86.6 in/min)
Vertical speed 0–100 cm/min (0–39.4 in/min) N/A
Weight 8 kg (18 lbs) 8 kg (18 lbs
Welding settings storage 1 (last used) 1 (last used)
Product Code (115–230 V, 50–60 Hz, plug EU) WOZ-0466-10-20-00-0 WOZ-0528-10-20-00-0
Product Code (115–230 V, 50–60 Hz, plug UK) WOZ-0466-10-10-00-0 WOZ-0528-10-10-00-0
Product Code (42 V, 50–60 Hz WOZ-0621-10-04-00-0 WOZ-0622-10-04-00-0
gecko gallery 1 gecko gallery 2 gecko gallery 3 gecko gallery 4 gecko gallery 5 gecko gallery 6 gecko gallery 7 gecko gallery 8 gecko gallery 9 gecko gallery 10 gecko gallery 11 gecko gallery 12 gecko gallery 13 gecko gallery 14 gecko gallery 15 gecko gallery 16 gecko gallery 17 gecko gallery 18 gecko gallery 19 gecko gallery 20 gecko gallery 21 gecko gallery 22 gecko gallery 23 gecko gallery 24 gecko gallery 25 gecko gallery 26

Wyniki: 52

Zastosowane filtry:

Nie znaleziono wyników. Spróbuj zmienić filtry lub wyszukiwaną frazę.

  • Magnet blocks (front & back) clamping force 55 N
    BLO-0466-45-01-00-0 Magnet blocks (front & back) clamping force 55 N
    • clamping force: 55 N
    • enables mounting on both sides of the tractor
  • Magnet blocks (back) clamping force 80 N
    BLO-0466-48-01-00-0 Magnet blocks (back) clamping force 80 N
    • clamping force: 80 N
    • for mounting at the back
  • Magnetic block for 36 mm wide flexible track
    BLO-0466-68-00-00-0 Magnetic block for 36 mm wide flexible track
    • sold in bulk packaging of 10 pieces
  • Magnet blocks (front) clamping force 80 N
    BLO-0752-22-00-00-0 Magnet blocks (front) clamping force 80 N
    • clamping force: 80 N
    • for mounting at the front
  • Bracket for vacuum modular unit for 160 mm wide flexible track
    DYS-0466-71-04-00-0 Bracket for vacuum modular unit for 160 mm wide flexible track
    • enables mounting of vacuum modular unit
  • Bracket for magnetic units for 160 mm wide flexible track
    DYS-0466-71-05-00-0 Bracket for magnetic units for 160 mm wide flexible track
    • enables mounting of magnetic unit, heat-resistant magnetic unit, pivoting magnetic unit, spacing-adjustable magnetic unit
  • Bracket for narrow magnetic unit for 160 mm wide flexible track
    DYS-0466-71-07-00-0 Bracket for narrow magnetic unit for 160 mm wide flexible track
    • enables mounting of narrow magnetic unit
  • Start-Stop arc ignition cable 6.5 m
    KBL-0466-17-00-00-0 Start-Stop arc ignition cable 6.5 m
    • length: 6.5 m (21 ft)
    • 4-pin female connector (inlet)
    • 2 pairs of colour-coded wires with male and female connectors
    • enables connection of 2 welders
  • Start-Stop arc ignition cable 13 m
    KBL-0466-17-00-04-0 Start-Stop arc ignition cable 13 m
    • length: 13 m (42 ft)
    • 4-pin female connector (inlet)
    • 2 pairs of colour-coded wires with male and female connectors
    • enables connection of 2 welders
  • Stainless steel drive wheel for GECKO family and SCORPIO Battery
    KOL-0466-72-00-00-0 Stainless steel drive wheel for GECKO family and SCORPIO Battery
    • diameter: 60 mm
    • made of stainless steel
  • Standard drive wheel for GECKO family and SCORPIO Battery
    KOL-0752-01-04-00-0 Standard drive wheel for GECKO family and SCORPIO Battery
    • diameter: 60 mm
    • increased heat-resistant silicone coating
  • OSC-8 PRO support for GECKO family
    KTW-0805-99-01-00-0 OSC-8 PRO support for GECKO family
    • enables mounting of the OSC-8 PRO oscillator with any tractor from the GECKO family
    • incl. two screws M6 x 14
  • Vacuum modular unit
    MST-0541-10-02-00-0 Vacuum modular unit
    • allows clamping tracks on both non-ferrous and ferromagnetic materials
    • maximum holding force up to 1400 N
    • consists of 2 vacuum pads and manifold block
    • requires bracket DYS-0541-11-01-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0466-71-04-00-0 for 160 mm wide flexible track
    • depending on purpose-built configurations can function as entry, middle, extension or end vacuum unit (see Vacuum System at pages 30-31)
  • Display cover for GECKO and GECKO HS
    OSL-0466-29-00-00-0 Display cover for GECKO and GECKO HS
  • Narrow magnetic unit with hexagon
    PDS-0582-10-00-02-0 Narrow magnetic unit with hexagon
    • allows clamping tracks to ferromagnetic surfaces and very close to their edges
    • maximum holding force up to 1500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0582-10-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0466-71-07-00-0 for 160 mm wide flexible track
  • Dual torch mount
    PDT-0466-40-00-00-0 Dual torch mount
    • max web height - 370 mm
    • max web thickness - 75 mm
  • Cable anchor for GECKO and GECKO HS
    PDT-0466-55-00-00-0 Cable anchor for GECKO and GECKO HS
    • rod length: 230 mm
    • rod diameter: 22.2 mm
  • Torch extension arm for GECKO family and LIZARD
    PRD-0466-43-00-00-0 Torch extension arm for GECKO family and LIZARD
    • block for attaching to tractor with 4 screws M5 x 16
    • rod 380 mm long / 22.2 mm OD
    • block with two holes 22.2 mm ID
    • rod 150 mm long/ 22.2 mm OD
    • block for attaching the cross-slide
    • increases the reach of the torch
    • enables repositioning and moving the cross-slide away from the tractor
  • Edge following guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0466-41-00-00-1 Edge following guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • 36 mm wide flexible track
    PRW-0466-50-01-01-0 36 mm wide flexible track
    • length: 1.85 m (6 ft)
    • min. curvature radius: 1.0 m (3.3 ft)
    • requires magnetic blocks BLO-0466-68-00-00-0
  • 160 mm wide flexible track
    PRW-0466-71-00-00-0 160 mm wide flexible track
    • length: 1.88 m (6.1 ft)
    • min. curvature radius: 1.25 m (4.1 ft)
    • enables various configurations (see suitable accessories below)
  • Adjustable guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-10-00-00-1 Adjustable guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Magnet guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-11-00-00-1 Magnet guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Low guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-12-00-00-1 Low guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • High guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-13-00-00-1 High guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Following guide arms 15 x 15 mm for 36 mm wide flexible track (set of 2 pcs)
    PRW-0752-14-00-00-1 Following guide arms 15 x 15 mm for 36 mm wide flexible track (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Guide arm screw short 30 mm
    SRB-0466-10-00-00-0 Guide arm screw short 30 mm
    • length: 30 mm
    • knurled nut
    • for guide arms with cross-section 15 mm x 15 mm
  • Isolation tube for welding torch
    TLJ-0419-04-02-03-0 Isolation tube for welding torch
    • insulation tube 22.2 mm OD/15 mm ID
  • Long rod torch holder with clip 16-22 mm
    UCW-0466-22-00-00-0 Long rod torch holder with clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 230 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Short low rod torch holder with clip 16-22 mm
    UCW-0476-06-00-00-0 Short low rod torch holder with clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • low rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
    • for use with, among others, a pendulum oscillator
  • Short rod torch holder with clip 16-22 mm
    UCW-0476-27-00-00-0 Short rod torch holder with clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Quick-release short rod torch holder with clip 16-22 mm
    UCW-0523-84-00-00-0 Quick-release short rod torch holder with clip 16-22 mm
    • quick-release clip for welding torches ranged 16-22 mm OD
    • swivel cube with grooves
    • spring lock
    • rod 110 mm long/ 22.2 mm OD
  • Long rod torch holder with clamp 16-22 mm
    UCW-0752-07-00-00-0 Long rod torch holder with clamp 16-22 mm
    • clamp for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 230 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Short rod torch holder with clamp 16-22 mm
    UCW-0754-07-00-00-0 Short rod torch holder with clamp 16-22 mm
    • clamp for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Guide adjustment tool for 36 mm wide flexible track
    UST-0466-53-00-00-0 Guide adjustment tool for 36 mm wide flexible track
    • enables proper parallel alignment of 36 mm flexible track against an outside edge or groove
  • Long rod clamp
    WLK-0466-04-10-00-0 Long rod clamp
    • rod 230 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Short rod clamp
    WLK-0476-20-01-00-0 Short rod clamp
    • rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Aluminium support for 160 mm wide flexible track
    WSP-0466-71-03-00-0 Aluminium support for 160 mm wide flexible track
    • suitable only for 160 mm wide flexible track when equipped with vacuum modular units
  • Steel support for 160 mm wide flexible track
    WSP-0466-71-06-00-0 Steel support for 160 mm wide flexible track
    • suitable only for 160 mm wide flexible track when equipped with magnetic units
  • Quick-release torch clip 16-22 mm
    ZCS-0270-42-00-00-0 Quick-release torch clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • quick-release mount
  • Standard torch holder incl. clamp 28-35 mm
    ZCS-0475-28-10-00-0 Standard torch holder incl. clamp 28-35 mm
    • clamp for cutting torches ranged 28-35 mm OD
    • dowel pin 22.2 mm OD
  • Torch clip 16-22 mm
    ZCS-0476-06-01-00-0 Torch clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
  • Torch clamp 22-35 mm
    ZRZ-0466-19-00-00-0 Torch clamp 22-35 mm
    • clamp for welding torches ranged 22-35 mm OD
    • dowel pin 15 mm OD
  • Torch clamp 16-22 mm
    ZRZ-0752-07-01-00-0 Torch clamp 16-22 mm
    • clamp for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
  • Cross-slide 0-35 mm both up-down and left-right
    ZSP-0466-14-00-00-0 Cross-slide 0-35 mm both up-down and left-right
    • 0-35 mm up and down adjustment
    • 0-35 mm left and right adjustment
  • Extended cross-slide 0-76 mm either up-down or left-right
    ZSP-0466-46-00-00-1 Extended cross-slide 0-76 mm either up-down or left-right
    • 0-75 mm extended adjustment in the preferred axis
    • 0-35 mm adjustment in the second axis
    • the axis setting depends on the cross-slide mounting position
  • Pivoting magnetic unit
    ZSP-0475-85-00-00-0 Pivoting magnetic unit
    • allows clamping tracks to flat, concave or convex ferromagnetic surfaces and pipes ID of at least 800 mm (31.5″)
    • may also be fixed on surfaces that differ in height up to 80 mm (3.1’’)
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Magnetic unit
    ZSP-0475-92-00-00-0 Magnetic unit
    • allows clamping tracks to ferromagnetic surfaces
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Heat-resistant magnetic unit
    ZSP-0475-93-00-00-0 Heat-resistant magnetic unit
    • suitable for working on more heated ferromagnetic surfaces
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Spacing-adjustable magnetic unit
    ZSP-0523-19-00-00-0 Spacing-adjustable magnetic unit
    • allows clamping tracks to ferromagnetic pipes with diameters of 25-230 mm (1-9’’) and the distance between pipe axes of 170-230 mm (6.7-9.1’’)
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Following guide arms for 160 mm wide flexible track (set of 2 pcs)
    ZST-0466-69-00-00-0 Following guide arms for 160 mm wide flexible track (set of 2 pcs)
  • Standard guide arms 15 x 15 mm (set of 2 pcs)
    ZST-0752-17-00-00-1 Standard guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm

Przykłady zastosowań

Overhead Crane & Lifting Systems Manufacturing
machine

GECKO

country

Italy

industry

Overhead Crane & Lifting Systems Manufacturing

description

Production of telescopic lifting systems with magnets for overhead cranes in Italy

Plasma cutting
machine

GECKO

country

Poland

description

GECKO plasma cutting large diameter steel pipe

Powiązane artykuły

GECKO – One Machine, Countless Applications
CAS Battery system, Welding, Welding and cutting tractors

GECKO – One Machine, Countless Applications

Czytaj więcej
The New Generation of GECKO Battery 2 Cordless Welding Tractor
CAS Battery system, Welding, Welding and cutting tractors

The New Generation of GECKO Battery 2 Cordless Welding Tractor

Czytaj więcej
Why equip rail free welding tractors with tracks?
CAS Battery system, Welding and cutting tractors

Why equip rail free welding tractors with tracks?

Czytaj więcej

Zapytanie Produktowe

Potrzebujesz więcej informacji o naszych rozwiązaniach przemysłowych? Porozmawiajmy! Wypełnij poniższy formularz, a nasz zespół szybko Ci pomoże. Jesteśmy tutaj, aby pomóc Ci znaleźć odpowiedni produkt dostosowany do Twoich potrzeb.