YouTube LinkedIn Facebook Instagram

GECKO Tractor Para Soldadura En Ángulo

Gecko es un mini tractor para soldadura repetitiva de alta calidad en ángulo. Tiene 4 ruedas con tracción imantada e información continua del control del mecanismo que proporciona una gran estabilización de la velocidad de avance en todas las posiciones de soldadura. Una velocidad constatne, repetitiva y continua proporciona una geometría uniforme y exacta de acuerdo a las especificaciones y reduciendo así sustancialmente el coste de hacer cordones excesivos mediante la reducción del hilo. Muchos accesorios opcionales hacen que el carro Gecko se adapte a muchas aplicaciones, incluyendo la soldadura y el corte de aceros y aceros inoxidables. El Gecko es un carro ligero que sólo pesa 8 kg (17 lb).

  • Uso recomendado y beneficios del carro Gecko:
  • Diseño compacto, ligero y robusto con carcasa de aluminio fundido
  • Alimentación a escoger 115–230 V, 50–60 Hz ó 42 V, 50–60 Hz
  • La tracción magnética positiva permite usarlo en soldadura en posición
  • Los imanes on/off permiten ajustar el tractor fácilmente al componente a soldar
  • Sin costes de mantenimiento de la tracción en las 4 ruedas con reductora de piñón
  • Ruedas de silicona resistentes al calor
  • 3 años de garantía

Ver Video Play Descargar PDF Download Enviar Consulta Email
welding-position-all
gecko

Para sacar el máximo partido a este tractor para soldadura o corte, echa un vistazo a nuestra nueva

Welding & cutting accessories catalogue.
continuous-welding

Soldadura continua

dual-torch-welding

Soldadura con dos sopletes

horizontal-speed

Velocidad horizontal

0 - 110 cm/min

pre-post

Pre-post

vertical-speed

Velocidad vertical

0 - 110 cm/min

warranty-tractors

Pantalla LED multifuncional

Guías para múltiples superficies

Soldadura con doble antorcha

Soldadura continua

Ajuste preciso de la antorcha

Soldadura en posiciones verticales

Ahora los usuarios pueden seleccionar tiempos de encendido del arco de hasta 5 segundos al inicio y al final del recorrido del GECKO para crear un relleno de soldadura óptimo en ambos extremos

Voltaje 1~ 115–230 V, 50–60 Hz 42 V, 50–60 Hz 1~ 115–230 V, 50–60 Hz 42 V, 50–60 Hz
Potencia 20 W 20 W
Posiciones de soldadura (según EN ISO 6947 y AWS/ASME) PA / 1F / 1G PB / 2F PC / 2G PD / 4F PE / 4G PG / 3F / 3G (contacte a su proveedor) PA / 1F / 1G PB / 2F PC / 2G PD / 4F PE / 4G
Diámetro de antorcha 16–22 mm; hasta 35mm opcional 16–22 mm; hasta 35mm opcional
Radio curvatura mínimo de superfice de trabajo OD 600 mm ID 800 mm OD 600 mm ID 800 mm
Espesor mínimo de metal base 4 mm 4 mm
Distancia al fondo 4 mm 4 mm
Fuerza de empuje horizontal 250 N 250 N
Fuerza de empuje vertical 175 N N/A
Rango de ajuste de la deslizadera 0–35 mm arriba-abajo, izquierda-derecha 0–35 mm arriba-abajo, izquierda-derecha
Velocidad horizontal 0–110 cm/min 5–220 cm/min
Velocidad vertical 0–100 cm/min N/A - No aplicable
Peso 8 kg 8 kg
Almacenamiento de parámetros 1 (los últimos usados) 1 (los últimos usados)
Código de producto (115–230 V, 50–60 Hz, enchufe EU) WOZ-0752-10-20-02-0 WOZ-0772-10-20-03-0
Código de producto (115–230 V, 50–60 Hz, enchufe UK) WOZ-0752-10-20-03-0 WOZ-0772-10-20-04-0
Código de producto (42 V, 50-60 Hz) WOZ-0777-10-04-01-0 WOZ-0778-10-04-01-0
gecko gallery 1 gecko gallery 2 gecko gallery 3 gecko gallery 4 gecko gallery 5 gecko gallery 6 gecko gallery 7 gecko gallery 8 gecko gallery 9 gecko gallery 10 gecko gallery 11 gecko gallery 12 gecko gallery 13 gecko gallery 14 gecko gallery 15 gecko gallery 16 gecko gallery 17 gecko gallery 18 gecko gallery 19 gecko gallery 20 gecko gallery 21 gecko gallery 22 gecko gallery 23 gecko gallery 24 gecko gallery 25 gecko gallery 26

Resultados: 52

Filtros aplicados:

No se encontraron resultados. Intenta cambiar tus filtros o término de búsqueda.

  • Magnet blocks (front & back) clamping force 55 N
    BLO-0466-45-01-00-0 Magnet blocks (front & back) clamping force 55 N
    • clamping force: 55 N
    • enables mounting on both sides of the tractor
  • Magnet blocks (back) clamping force 80 N
    BLO-0466-48-01-00-0 Magnet blocks (back) clamping force 80 N
    • clamping force: 80 N
    • for mounting at the back
  • Magnetic block for 36 mm wide flexible track
    BLO-0466-68-00-00-0 Magnetic block for 36 mm wide flexible track
    • sold in bulk packaging of 10 pieces
  • Magnet blocks (front) clamping force 80 N
    BLO-0752-22-00-00-0 Magnet blocks (front) clamping force 80 N
    • clamping force: 80 N
    • for mounting at the front
  • Bracket for vacuum modular unit for 160 mm wide flexible track
    DYS-0466-71-04-00-0 Bracket for vacuum modular unit for 160 mm wide flexible track
    • enables mounting of vacuum modular unit
  • Bracket for magnetic units for 160 mm wide flexible track
    DYS-0466-71-05-00-0 Bracket for magnetic units for 160 mm wide flexible track
    • enables mounting of magnetic unit, heat-resistant magnetic unit, pivoting magnetic unit, spacing-adjustable magnetic unit
  • Bracket for narrow magnetic unit for 160 mm wide flexible track
    DYS-0466-71-07-00-0 Bracket for narrow magnetic unit for 160 mm wide flexible track
    • enables mounting of narrow magnetic unit
  • Start-Stop arc ignition cable 6.5 m
    KBL-0466-17-00-00-0 Start-Stop arc ignition cable 6.5 m
    • length: 6.5 m (21 ft)
    • 4-pin female connector (inlet)
    • 2 pairs of colour-coded wires with male and female connectors
    • enables connection of 2 welders
  • Start-Stop arc ignition cable 13 m
    KBL-0466-17-00-04-0 Start-Stop arc ignition cable 13 m
    • length: 13 m (42 ft)
    • 4-pin female connector (inlet)
    • 2 pairs of colour-coded wires with male and female connectors
    • enables connection of 2 welders
  • Stainless steel drive wheel for GECKO family and SCORPIO Battery
    KOL-0466-72-00-00-0 Stainless steel drive wheel for GECKO family and SCORPIO Battery
    • diameter: 60 mm
    • made of stainless steel
  • Standard drive wheel for GECKO family and SCORPIO Battery
    KOL-0752-01-04-00-0 Standard drive wheel for GECKO family and SCORPIO Battery
    • diameter: 60 mm
    • increased heat-resistant silicone coating
  • OSC-8 PRO support for GECKO family
    KTW-0805-99-01-00-0 OSC-8 PRO support for GECKO family
    • enables mounting of the OSC-8 PRO oscillator with any tractor from the GECKO family
    • incl. two screws M6 x 14
  • Vacuum modular unit
    MST-0541-10-02-00-0 Vacuum modular unit
    • allows clamping tracks on both non-ferrous and ferromagnetic materials
    • maximum holding force up to 1400 N
    • consists of 2 vacuum pads and manifold block
    • requires bracket DYS-0541-11-01-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0466-71-04-00-0 for 160 mm wide flexible track
    • depending on purpose-built configurations can function as entry, middle, extension or end vacuum unit (see Vacuum System at pages 30-31)
  • Display cover for GECKO and GECKO HS
    OSL-0466-29-00-00-0 Display cover for GECKO and GECKO HS
  • Narrow magnetic unit with hexagon
    PDS-0582-10-00-02-0 Narrow magnetic unit with hexagon
    • allows clamping tracks to ferromagnetic surfaces and very close to their edges
    • maximum holding force up to 1500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0582-10-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0466-71-07-00-0 for 160 mm wide flexible track
  • Dual torch mount
    PDT-0466-40-00-00-0 Dual torch mount
    • max web height - 370 mm
    • max web thickness - 75 mm
  • Cable anchor for GECKO and GECKO HS
    PDT-0466-55-00-00-0 Cable anchor for GECKO and GECKO HS
    • rod length: 230 mm
    • rod diameter: 22.2 mm
  • Torch extension arm for GECKO family and LIZARD
    PRD-0466-43-00-00-0 Torch extension arm for GECKO family and LIZARD
    • block for attaching to tractor with 4 screws M5 x 16
    • rod 380 mm long / 22.2 mm OD
    • block with two holes 22.2 mm ID
    • rod 150 mm long/ 22.2 mm OD
    • block for attaching the cross-slide
    • increases the reach of the torch
    • enables repositioning and moving the cross-slide away from the tractor
  • Edge following guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0466-41-00-00-1 Edge following guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Riel flexible
    PRW-0466-50-01-01-0 Riel flexible
    • length: 1.85 m (6 ft)
    • min. curvature radius: 1.0 m (3.3 ft)
    • requires magnetic blocks BLO-0466-68-00-00-0
  • Trilho flexível 160mm
    PRW-0466-71-00-00-0 Trilho flexível 160mm
    • length: 1.88 m (6.1 ft)
    • min. curvature radius: 1.25 m (4.1 ft)
    • enables various configurations (see suitable accessories below)
  • Adjustable guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-10-00-00-1 Adjustable guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Magnet guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-11-00-00-1 Magnet guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Low guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-12-00-00-1 Low guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • High guide arms 15 x 15 mm (set of 2 pcs)
    PRW-0752-13-00-00-1 High guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Following guide arms 15 x 15 mm for 36 mm wide flexible track (set of 2 pcs)
    PRW-0752-14-00-00-1 Following guide arms 15 x 15 mm for 36 mm wide flexible track (set of 2 pcs)
    • cross-section: 15 mm x 15 mm
  • Guide arm screw short 30 mm
    SRB-0466-10-00-00-0 Guide arm screw short 30 mm
    • length: 30 mm
    • knurled nut
    • for guide arms with cross-section 15 mm x 15 mm
  • Isolation tube for welding torch
    TLJ-0419-04-02-03-0 Isolation tube for welding torch
    • insulation tube 22.2 mm OD/15 mm ID
  • Long rod torch holder with clip 16-22 mm
    UCW-0466-22-00-00-0 Long rod torch holder with clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 230 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Short low rod torch holder with clip 16-22 mm
    UCW-0476-06-00-00-0 Short low rod torch holder with clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • low rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
    • for use with, among others, a pendulum oscillator
  • Short rod torch holder with clip 16-22 mm
    UCW-0476-27-00-00-0 Short rod torch holder with clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Quick-release short rod torch holder with clip 16-22 mm
    UCW-0523-84-00-00-0 Quick-release short rod torch holder with clip 16-22 mm
    • quick-release clip for welding torches ranged 16-22 mm OD
    • swivel cube with grooves
    • spring lock
    • rod 110 mm long/ 22.2 mm OD
  • Long rod torch holder with clamp 16-22 mm
    UCW-0752-07-00-00-0 Long rod torch holder with clamp 16-22 mm
    • clamp for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 230 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Short rod torch holder with clamp 16-22 mm
    UCW-0754-07-00-00-0 Short rod torch holder with clamp 16-22 mm
    • clamp for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
    • rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Guide adjustment tool for 36 mm wide flexible track
    UST-0466-53-00-00-0 Guide adjustment tool for 36 mm wide flexible track
    • enables proper parallel alignment of 36 mm flexible track against an outside edge or groove
  • Long rod clamp
    WLK-0466-04-10-00-0 Long rod clamp
    • rod 230 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Short rod clamp
    WLK-0476-20-01-00-0 Short rod clamp
    • rod 110 mm long/ 22.2 mm OD
    • clamping block 22.2 mm ID with lever
    • insulation tube 22.2 mm OD/15 mm ID
  • Aluminium support for 160 mm wide flexible track
    WSP-0466-71-03-00-0 Aluminium support for 160 mm wide flexible track
    • suitable only for 160 mm wide flexible track when equipped with vacuum modular units
  • Steel support for 160 mm wide flexible track
    WSP-0466-71-06-00-0 Steel support for 160 mm wide flexible track
    • suitable only for 160 mm wide flexible track when equipped with magnetic units
  • Quick-release torch clip 16-22 mm
    ZCS-0270-42-00-00-0 Quick-release torch clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • quick-release mount
  • Standard torch holder incl. clamp 28-35 mm
    ZCS-0475-28-10-00-0 Standard torch holder incl. clamp 28-35 mm
    • clamp for cutting torches ranged 28-35 mm OD
    • dowel pin 22.2 mm OD
  • Torch clip 16-22 mm
    ZCS-0476-06-01-00-0 Torch clip 16-22 mm
    • clip for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
  • Torch clamp 22-35 mm
    ZRZ-0466-19-00-00-0 Torch clamp 22-35 mm
    • clamp for welding torches ranged 22-35 mm OD
    • dowel pin 15 mm OD
  • Torch clamp 16-22 mm
    ZRZ-0752-07-01-00-0 Torch clamp 16-22 mm
    • clamp for welding torches ranged 16-22 mm OD
    • dowel pin 15 mm OD
  • Cross-slide 0-35 mm both up-down and left-right
    ZSP-0466-14-00-00-0 Cross-slide 0-35 mm both up-down and left-right
    • 0-35 mm up and down adjustment
    • 0-35 mm left and right adjustment
  • Extended cross-slide 0-76 mm either up-down or left-right
    ZSP-0466-46-00-00-1 Extended cross-slide 0-76 mm either up-down or left-right
    • 0-75 mm extended adjustment in the preferred axis
    • 0-35 mm adjustment in the second axis
    • the axis setting depends on the cross-slide mounting position
  • Pivoting magnetic unit
    ZSP-0475-85-00-00-0 Pivoting magnetic unit
    • allows clamping tracks to flat, concave or convex ferromagnetic surfaces and pipes ID of at least 800 mm (31.5″)
    • may also be fixed on surfaces that differ in height up to 80 mm (3.1’’)
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Magnetic unit
    ZSP-0475-92-00-00-0 Magnetic unit
    • allows clamping tracks to ferromagnetic surfaces
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Heat-resistant magnetic unit
    ZSP-0475-93-00-00-0 Heat-resistant magnetic unit
    • suitable for working on more heated ferromagnetic surfaces
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Spacing-adjustable magnetic unit
    ZSP-0523-19-00-00-0 Spacing-adjustable magnetic unit
    • allows clamping tracks to ferromagnetic pipes with diameters of 25-230 mm (1-9’’) and the distance between pipe axes of 170-230 mm (6.7-9.1’’)
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Following guide arms for 160 mm wide flexible track (set of 2 pcs)
    ZST-0466-69-00-00-0 Following guide arms for 160 mm wide flexible track (set of 2 pcs)
  • Standard guide arms 15 x 15 mm (set of 2 pcs)
    ZST-0752-17-00-00-1 Standard guide arms 15 x 15 mm (set of 2 pcs)
    • cross-section: 15 mm x 15 mm

Casos prácticos

Overhead Crane & Lifting Systems Manufacturing
machine

GECKO

country

Italy

industry

Overhead Crane & Lifting Systems Manufacturing

description

Production of telescopic lifting systems with magnets for overhead cranes in Italy

Plasma cutting
machine

GECKO

country

Poland

description

GECKO plasma cutting large diameter steel pipe

Artículos relacionados

GECKO – One Machine, Countless Applications
CAS Battery system, Welding, Welding and cutting tractors

GECKO – One Machine, Countless Applications

Read more
The New Generation of GECKO Battery 2 Cordless Welding Tractor
CAS Battery system, Welding, Welding and cutting tractors

The New Generation of GECKO Battery 2 Cordless Welding Tractor

Read more
Why equip rail free welding tractors with tracks?
CAS Battery system, Welding and cutting tractors

Why equip rail free welding tractors with tracks?

Read more

Consulta sobre un producto

¿Necesitas más detalles sobre nuestras soluciones industriales? ¡Hablemos! Completa el formulario a continuación y nuestro equipo te asistirá de inmediato. Estamos aquí para ayudarte a encontrar el producto adecuado para tus necesidades específicas.