YouTube LinkedIn Facebook Instagram

Dragon Carro De Corte

El carro Dragon está diseñado para llevar varios tipos de sopletes con diámetro de cuello 28-35 mm para el corte y biselado automatizado de una amplia gama de aplicaciones.

  • La más moderna tecnología, seguimiento de la antorcha controlado digitalmente
  • Corte y biselado hasta 45º (también para dos sopletes en paralelo)
  • Rápida colocación de la antorcha en su soporte de cuello 28 a 35 mm
  • Control de velocidad avanzado con el regulador digital PID que incorpora
  • Display LED con lectura de la velocidad prefijada y la actual, e informe de mensajes
  • Diseño rígido probado contra el calor
  • 2 ruedas motrices con unidad de auto-freno
  • Desbloqueo rápido de la tracción para reposicionar fácilmente
  • Trabaja sobre raíl o directamente sobre la pieza de trabajo
  • Raíles conectables para alcanzar varias longitudes
  • Amplio surtido de accesorios opcionales para una variedad de aplicaciones, como soportes de antorchas, válvulas de gas, compás, etc.
  • 3 años de garantía
Ver Video Play Descargar PDF Download Enviar Consulta Email
dragon dragon hs

Para sacar el máximo partido a este tractor para soldadura o corte, echa un vistazo a nuestra nueva

Welding & cutting accessories catalogue.
straight-cutting

Corte recto

diagonal-cutting

Corte en diagonal

strips-cutting

Corte de tiras

k-bevel-cutting

Corte en K

double-diagonal-cutting

Corte diagonal doble

warranty-tractors

Corte recto

El tractor permite biselar en el ángulo deseado.

Corte circular

Corte de tiras

Pantalla LED con lectura de la velocidad real y configurada, y mensajes de reporte.

Cortes y biseles de calidad reducen el tiempo de ajuste y esmerilado y sientan las bases para una soldadura de alta calidad.

Corte por plasma

Dragon Dragon HS
Voltage ~ 115–230 V, 50–60 Hz ~ 42 V, 50–60 Hz ~ 115–230 V, 50–60 Hz
Power 20 W 20 W
Operating position horizontal horizontal
Torch diameter 28–35 mm (1.10–1.38’’) 28–35 mm (1.10–1.38’’)
Ground clearance 8 mm (0.31’’) 8 mm (0.31’’)
Speed 0–150 cm/min (0–59 in/min) 10–300 cm/min (4–118 in/min)
Weight 16.8 kg (37.0 lbs) 16.8 kg (37.0 lbs
dragon dragon hs gallery 01 dragon dragon hs gallery 02 dragon dragon hs gallery 03 dragon dragon hs gallery 04 dragon dragon hs gallery 05 dragon dragon hs gallery 06 dragon dragon hs gallery 07 dragon dragon hs gallery 08 dragon dragon hs gallery 09 dragon dragon hs gallery 10 dragon dragon hs gallery 11 dragon dragon hs gallery 12 dragon dragon hs gallery 13 dragon dragon hs gallery 14 dragon dragon hs gallery 15 dragon dragon hs gallery 16 dragon dragon hs gallery 17 dragon dragon hs gallery 18

Resultados: 40

Filtros aplicados:

No se encontraron resultados. Intenta cambiar tus filtros o término de búsqueda.

  • Circle cutting attachment
    CYR-0475-22-00-00-0 Circle cutting attachment
    • allows for cutting holes with the radius of 240-1000 mm (9 29/64″-39 3/8″)
  • Circle cutting attachment (extended)
    CYR-0475-83-00-00-0 Circle cutting attachment (extended)
    • allows for cutting holes with the radius of 400-2500 mm (15 3/4″-98 27/64″)
  • Arc ignition cable for plasma
    KBL-0475-58-05-00-0 Arc ignition cable for plasma
    • length: 6.5 m (21 ft)
    • 4-pin female connector (inlet)
    • 2 wires with female connectors (oulet)
  • Clamping block (large)
    KST-0475-82-00-00-0 Clamping block (large)
    • hole 22.2 mm ID for rods
    • hole 25 mm ID for rods with geared rack
    • 2 locking levers
  • Vacuum modular unit
    MST-0541-10-02-00-0 Vacuum modular unit
    • allows clamping tracks on both non-ferrous and ferromagnetic materials
    • maximum holding force up to 1400 N
    • consists of 2 vacuum pads and manifold block
    • requires bracket DYS-0541-11-01-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0466-71-04-00-0 for 160 mm wide flexible track
    • depending on purpose-built configurations can function as entry, middle, extension or end vacuum unit (see Vacuum System at pages 30-31)
  • Lightweight magnetic unit
    MST-0677-00-00-00-0 Lightweight magnetic unit
    • allows clamping tracks to ferromagnetic surfaces in horizontal position
    • lower weight (1.3 kg vs 2.7 kg) and smaller dimensions comparing to regular magnetic unit
    • maximum holding force up to 980 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-21-00-00-0 for rigid track
  • Heat protection shield (left)
    OSL-0475-54-00-00-0 Heat protection shield (left)
  • Heat protection shield (right)
    OSL-0475-55-00-00-0 Heat protection shield (right)
  • Heat protection shield (bottom)
    OSL-0753-20-00-00-0 Heat protection shield (bottom)
  • Narrow magnetic unit with hexagon
    PDS-0582-10-00-02-0 Narrow magnetic unit with hexagon
    • allows clamping tracks to ferromagnetic surfaces and very close to their edges
    • maximum holding force up to 1500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0582-10-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0466-71-07-00-0 for 160 mm wide flexible track
  • Roller supporter
    PDT-0475-26-00-00-0 Roller supporter
    • 280 mm long rod with roller ball
    • hole 22.2 mm ID for rod with roller ball
    • hole 25 mm ID for rod with geared rack
    • 2 locking levers
  • Cable anchor for DRAGON family
    PDT-0475-34-00-00-0 Cable anchor for DRAGON family
    • rod length: 256 mm
    • rod diameter: 22.2 mm
  • Gas manifold bracket for DRAGON family
    PDT-0475-87-00-00-0 Gas manifold bracket for DRAGON family
  • Counterweight 1.3 kg (2.9 lbs)
    PWG-0753-09-00-00-0 Counterweight 1.3 kg (2.9 lbs)
    • 1.3 kg (2.9 lbs)
  • Large counterweight 2,6 kg (5,7lbs)
    PWG-0753-12-00-00-0 Large counterweight 2,6 kg (5,7lbs)
    • 2,6 kg (5,7 lbs)
  • 700 mm long rod with 647 mm geared rack
    RAM-0475-07-03-00-0 700 mm long rod with 647 mm geared rack
    • 700 mm total length
    • 22.2 mm OD at the rod ends
    • 25 mm OD on a 647 mm long geared rack
    • tapped hole M6 - 12 deep || 14 total, at both ends
  • 540 mm long rod with 449 mm geared rack
    RAM-0753-07-00-00-0 540 mm long rod with 449 mm geared rack
    • 540 mm total length
    • 22.2 mm OD at the rod ends
    • 25 mm OD on a 449 mm long geared rack
    • tapped hole M6 - 12 deep || 14 total, at both ends
  • 1000 mm long rod with 940 mm geared rack
    RAM-0753-13-00-00-0 1000 mm long rod with 940 mm geared rack
    • 1000 mm total length
    • 22.2 mm OD at the rod ends
    • 25 mm OD on a 940 mm long geared rack
    • tapped hole M6 - 12 deep || 14 total, at both ends
  • Manifold 2x3 (metric)
    RZD-0475-63-00-00-0 Manifold 2x3 (metric)
    • inlet 1/4″ RH
    • inlet 3/8″ LH
    • outlet 1/4″ RH (2 pcs)
    • outlet 3/8″ LH
  • Manifold 2x2 (metric)
    RZD-0475-64-00-00-0 Manifold 2x2 (metric)
    • inlet 1/4″ RH
    • inlet 3/8″ LH
    • outlet 1/4″ RH
    • outlet 3/8″ LH
  • Manifold 2x2 with cut-off valve (metric)
    RZD-0475-65-00-00-0 Manifold 2x2 with cut-off valve (metric)
    • inlet 1/4″ RH
    • inlet 3/8″ LH
    • outlet 1/4″ RH
    • outlet 3/8″ LH
    • cut-off valve
  • Manifold 2x3 with cut-off valve (metric)
    RZD-0475-66-00-00-0 Manifold 2x3 with cut-off valve (metric)
    • inlet 1/4″ RH
    • inlet 3/8″ LH
    • outlet 1/4″ RH (2 pcs)
    • outlet 3/8″ LH
    • cut-off valve
  • Manifold 2x3 (imperial)
    RZD-0475-67-00-00-0 Manifold 2x3 (imperial)
    • inlet 9/16″ RH
    • inlet 9/16″ LH
    • outlet 9/16″ RH (2 pcs)
    • outlet 9/16″ LH
  • Manifold 2x2 (imperial)
    RZD-0475-68-00-00-0 Manifold 2x2 (imperial)
    • inlet 9/16″ RH
    • inlet 9/16″ LH
    • outlet 9/16″ RH
    • outlet 9/16″ LH
  • Manifold 2x3 with cut-off valve (imperial)
    RZD-0475-69-00-00-0 Manifold 2x3 with cut-off valve (imperial)
    • inlet 9/16″ RH
    • inlet 9/16″ LH
    • outlet 9/16″ RH (2 pcs)
    • outlet 9/16″ LH
    • cut-off valve
  • Manifold 2x2 with cut-off valve (imperial)
    RZD-0475-70-00-00-0 Manifold 2x2 with cut-off valve (imperial)
    • inlet 9/16″ RH
    • inlet 9/16″ LH
    • outlet 9/16″ RH
    • outlet 9/16″ LH
    • cut-off valve
  • Manifold 3/3 with cut-off valve (imperial)
    RZD-0475-71-00-00-0 Manifold 3/3 with cut-off valve (imperial)
    • inlet 9/16″ RH (2 pcs)
    • inlet 9/16″ LH
    • outlet 9/16″ RH (2 pcs)
    • outlet 9/16″ LH
    • cut-off valve
  • Manifold 3/3 with cut-off valve (metric)
    RZD-0475-72-00-00-0 Manifold 3/3 with cut-off valve (metric)
    • inlet 1/4″ RH (2 pcs)
    • inlet 3/8″ LH
    • outlet 1/4″ RH (2 pcs)
    • outlet 3/8″ LH
    • cut-off valve
  • Manifold 3/3 (imperial)
    RZD-0475-73-00-00-0 Manifold 3/3 (imperial)
    • inlet 9/16″ RH (2 pcs)
    • inlet 9/16″ LH
    • outlet 9/16″ RH (2 pcs)
    • outlet 9/16″ LH
  • Manifold 3/3 (metric)
    RZD-0475-74-00-00-0 Manifold 3/3 (metric)
    • inlet 1/4″ RH (2 pcs)
    • inlet 3/8″ LH
    • outlet 1/4″ RH (2 pcs)
    • outlet 3/8″ LH
  • Los rieles en “V
    TRO-0475-13-00-00-0 Los rieles en “V
    • for straight line applications
    • “V” Groove center line 152 mm (6″)
    • length of a single rail 1.8 m (5.9 ft)
    • joinable for unlimited run length
    • can be fixed on both ferrous and non-ferrous materials by means of magnetic or vacuum units
    • enables various configurations (see suitable accessories below)
  • Sliding clamping block type 2
    UCW-0475-15-00-00-1 Sliding clamping block type 2
    • hole 25 mm ID for moving rods with geared rack
    • (in Y axis) left and right
    • star knob with sprocket m=1 t=16
    • hole 22.2 mm ID for rods
    • 2 locking levers
  • Standard torch holder incl. clamp 28-35 mm and angle adjustment
    UCW-0475-28-00-00-0 Standard torch holder incl. clamp 28-35 mm and angle adjustment
    • clamp for cutting torches ranged 28-35 mm OD
    • dowel pin 22.2 mm OD
    • double clamping block with two holes 22.2 mm ID and levers
  • Machine torch holder 35 mm (1-3/8")
    UCW-0475-29-00-00-1 Machine torch holder 35 mm (1-3/8")
    • suitable for 35 mm (1-3/8″) diameter barrel machine torch with 32 pitch rack
    • 32 pitch gear shaft
    • double clamping block with two holes 22.2 mm ID and levers
  • Machine torch holder 30 mm (1-3/16")
    UCW-0475-61-00-00-0 Machine torch holder 30 mm (1-3/16")
    • suitable for 30 mm (1-3/16″) diameter barrel machine torch with 32 pitch rack
    • 32 pitch gear shaft
    • double clamping block with two holes 22.2 mm ID and levers
  • Precise torch holder incl. clamp 28-35 mm with angle and height adjustment
    UCW-0753-08-00-00-0 Precise torch holder incl. clamp 28-35 mm with angle and height adjustment
    • clamp for cutting torches ranged 28-35 mm OD
    • dowel pin 22.2 mm OD
    • tilt the torch 45 degrees to the left and right
    • up-down adjustment within a range of up to 81 mm
    • double clamping block with tapered tip with two holes 22.2 mm ID and levers
  • Standard torch holder incl. clamp 28-35 mm
    ZCS-0475-28-10-00-0 Standard torch holder incl. clamp 28-35 mm
    • clamp for cutting torches ranged 28-35 mm OD
    • dowel pin 22.2 mm OD
  • Plasma arc ignition
    ZSP-0475-58-00-00-0 Plasma arc ignition
    • switch ON/OFF
    • 4-pin male socket
  • Magnetic unit
    ZSP-0475-92-00-00-0 Magnetic unit
    • allows clamping tracks to ferromagnetic surfaces
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track
  • Heat-resistant magnetic unit
    ZSP-0475-93-00-00-0 Heat-resistant magnetic unit
    • suitable for working on more heated ferromagnetic surfaces
    • maximum holding force up to 2500 N
    • intermediate position (between OFF/ON) with partial holding force helps to adjust the right track position
    • requires bracket DYS-0482-19-00-00-0 for hi-flex track and semi-flexible track
    • requires bracket DYS-0482-21-00-00-0 for rigid track
    • requires bracket DYS-0466-71-05-00-0 for 160 mm wide flexible track

Casos prácticos

Super Duplex Bevelling
machine

DRAGON

country

Poland

material

Super Duplex

description

DRAGON Plasma bevelling of 30 mm and 12 mm Super Duplex steel using nitrogen as the shielding gas
Super Duplex is known for its exceptional strength and corrosion resistance, but it also requires a highly stable and precise cutting process.
The use of nitrogen ensured high edge quality while minimizing oxidation.

Consulta sobre un producto

¿Necesitas más detalles sobre nuestras soluciones industriales? ¡Hablemos! Completa el formulario a continuación y nuestro equipo te asistirá de inmediato. Estamos aquí para ayudarte a encontrar el producto adecuado para tus necesidades específicas.