PRO-132T | Heavy Duty Tapping and Drilling Machine


The PRO-132T drilling machine is designed for large hole making and very big tapping applications. Powerful 2300 W variable speed motor enables milling capacity up to 130 mm (5”) and drilling capacity up to 47 mm (1-7/8”).


Core drill max 130 mm (5")
Twist drill max 47 mm (1-7/8”)
Spindle MT4
Depth of cut 100 mm (4")
Stroke 260 mm (10")
Speed 55-85 rpm
100-150 rpm
200-300 rpm
350-520 rpm
Motor Power 2300 W
Thread cutting M42 (1-5/8")
Weight 31 kg (68 lbs)

PRO-132T | Heavy Duty Tapping and Drilling Machine

Machine’s forward & reverse work modes allow thread cutting up to M42 with Promotech’s new tapping system. Four speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.

  • 2300 W powerful motor with heavy duty 4-speed gearbox
  • intelligent speed control system maintains stable speed regardless of load changes
  • tapping of through and blind holes
  • milling with TCT or HSS cutters or drilling
  • electronic speed control
  • electronic clutch
  • rigid design extends tool life
  • tilt sensor stops the motor in cases of machines break away
  • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes
  • innovative smart magnet with reduced weight
  • intuitive control panel at top of the drill
  • large coolant container

Key features

Milling capacity up to 130 mm (5″)
Max depth of cut up to 100 mm (4″)

Drilling capacity up to 47 mm (1-7/8″)
Max stroke up to 260 mm (10″)

Counterclockwise (CCW) rotation
User-friendly control of tapping tool release

Intuitive control panel at top of the drill

Tapping chuck feat. securing nut

Through hole tapping up to M42

Blind hole tapping up to M33


Make sure you are familiar with Promotech PRO-132T | Heavy Dusty Tapping and Drilling Machine brochure including technical data and detailed information about this product. Should you have any further questions we encourage you to send us an enquiry.

Technical specification

Motor Speeds (under load)55-85 rpm (gear I)
100-150 rpm (gear II)
200-300 rpm (gear III)
350-520 rpm (gear IV)
Motor Power2300 W
Weight31 kg (68 lbs)
Max milling capacity130 mm (5”)*
Max drilling capacity
47 mm (1-7/8")
Max Tap sizeM42 (1-5/8")
Stroke260 mm (10”)
Max depth of cut100 mm (4”)
Voltage1~ 220–240 V, 50–60 Hz
1~ 110–120 V, 50–60 Hz
Magnetic clamping force
(surface with the thickness of 25 mm and roughness Ra = 1.25)
2550 kG (25 000 N)
Magnet Base Dimensions105 mm × 315 mm × 50 mm
4-1/8" x 12-3/8” x 2"
Min. Workpiece Thickness10 mm (3/8")
Tool holder19 mm (3/4") or 32 mm (1-1/4") Weldon
Product Code 220–240 V, 50–60 HzWRT-0583-10-20-00-0
Product Code 110–120 V, 50–60 HzWRT-0583-10-20-00-0

*If more than 60 mm (2.36″), use an MT4 arbor with 32 mm Weldon tool holder (UCW-583-13-00-00-0).